Chandeliers usually consist of one or more (often many more) bulbs.  Screw-base bulbs and fixtures without AC drivers inside can be used by adding a SIB to the “Hot” and “Neutral” of the fixture.

Simply connect the black wire to the LED+ and the White wire to the LED-.  There’s no Ground return path in DC so the ground can be removed or connected to an earth ground if your AHJ requires that (for some outdated reason?).

At the PDM, use an L2-SV Switched Voltage module to send voltage from the PDM supply out the port to the fixture.

LumenCache makes DC bulbs with incredible dimming ratio and efficiency.   When adding bulbs to an L2-SV, remember to total up the Current per bulb as they are all wired in parallel inside the fixture.  AC fixtures are always wired in parallel, so this is similar to what you’re used to if you’re an electrician.

For larger chandeliers or where you have more than 30W attached, we recommend using a Cat6 for optimal efficiency.