Course Content
Review Design
It's always best to start with a plan. Here's what to look for before starting installation.
0/4
Switches and Sensors
00:00
Dimming and “Resume Level”
00:00
3-Way and Multi-Way Switches
00:00
Operating Switches and Lights Quiz
00:05:00
Prewire
Prewire involves routing and pulling wires from the panels to the lights, switches, and devices, as well as wiring from main AC or DC power sources to the panels.
0/4
Lighting Control Panel
00:00
Wiring to Lights
00:00
Wiring to Switches
00:00
Advanced Wiring (USB-C outlets, High Power Strips, Large Chandeliers)
00:00
Trim and Basic Commission
Trim Phase includes connecting lights and switches, grouping lights into zones, pairing switches to lighting zones, configuring occupancy sensors, and assigning keypad/touchpad button actions. Cleaning and trimming the panels. This is usually the last step required for final inspections.
0/2
Wiring AC style Fixtures to Generic Smart Interface Blocks (SIBs)
00:00
Wiring LEDs (Single color and Tunable White) to Generic CCT Smart Interface Blocks (SIBs)
00:00
Accessing via Wifi and Basic Controls
Accessing via Wifi, naming devices and zones, connecting to home wifi, controlling lights, testing switches and sensors.
Installing ReNetA

ReNetA is a lighting control panel system. Thin Cat5 wires homerun from a centrally located panel or panels to the lights and switches.

An electrician installs a single AC power outlet in the enclosure, or the panel can accept ~48VDC directly from external batteries or a remote 48VDC (nominal) power source.

Modules connect together quickly at trim phase making all the necessary electrical and control connections without the need for any tools.

(***more***)

Previous
Next
0% Complete